van Staden RC, Guan H, Loo YC, Johnson N & Meredith N, 2008. ‘Comparaitve analysis of two implant-crown connections, Applied Osseointegration Research, vol.6, pp.48-53.
Strub JR & Gerds T, 2003. ‘Fracture strength and failure mode of five different single-tooth implant-abutment combinations’, International Journal of Prosthodontics, vol.16, pp.167-171.
Maeda Y, Satoh T & Sogo M, 2006. ‘In vitro differences of stress concentrations for internal and external hex implant-abutment connections: a short communication’, Journal of Oral Rehabilitation, vol.33, pp.75-78.
Khraisat A, Hashimoto A, Nomura S & Miyakawa O, 2004. ‘Effect of lateral cyclic loading on abutment screw loosening of an external hexagon implant system’, Journal of Prosthetic Dentistry, vol.91, pp.326-334.
Merz BR, Hunenbart S & Belser UC, 2000. ‘Mechanics of the implant-abutment connection: an 8-degree taper compared to a butt joint connection’, International Journal of Oral and Maxillofacial Implants, vol.15, pp.519-526.
Khraisat A, Stegaroiu R, Nomura S & Miyakawa O, 2002. ‘Fatigue resistance of two implant/abutment joint designs’, Journal of Prosthetic Dentistry, vol.88, pp.604-610.
Khraisat A, 2005. ‘Stability of implant-abutment interface with a hexagon-mediated butt joint: failure mode and bending resistance’, Clinical Implant Dentistry Related Research, vol.7(4), pp.221-228.
Haack JE, Sakaguchi RL, Sun T & Coffey JP, 1995. ‘Elongation and preload stress in dental implant abutment screws’, International Journal of Oral & Maxillofacial Implants, vol.10(5), pp.529-536.
Gehrke P, Dhom G, Brunner J, Wolf D, Degidi M & Piattelli A, 2006. ‘Zirconium implant abutments: fracture strength and influence of cyclic loading on retaining-screw loosening’, Quintessence International, vol.37(1), pp.19-26.
Gratton DG, Aquilino SA & Stanford CM, 2001. ‘Micromotion and dynamic fatigue properties of the dental implant-abutment interface’, Journal of Prosthetic Dentistry, vol.85, pp.47-52.
Cibirka RM, Nelson SK, Lang BR & Rueggeberg FA, 2001. ‘Examination of the implant-abutment interface after fatigue testing’, Journal of Prosthetic Dentistry, vol.85, pp.267-275.
Drago CJ, 1995. ‘A clinical study of the efficacy of gold-tite square abutment screws in cement-retained implant restorations’, International Journal of Oral & Maxillofacial Implants, vol.10, pp.529-536.
Byrne D, Jacobs S, O’Connell B, Houston F & Claffey N, 2006. ‘Preloads generated with repeated tightening in three types of screws used in dental implant assemblies’, Journal of Prosthetic Dentistry, vol.15(3), pp.164-171.
Binon PP, 2000. ‘The external hexagonal interface and screw-joint stability: a primer on threaded fasteners’, Quintessence Dental Technology, vol.23, pp.91105.
Binon PP, 2000. ‘Implants and components: entering the new millennium’, International Journal of Oral & Maxillofacial Implants, vol 15, pp.76-94.
