Dental Implant Instrumentation
The rationalised design of the Neoss Implant System enables implant placement and restoration to be carried out using the minimum number of dental implant instruments and components.
The Neoss implant is supplied in a kit as a ‘sterile blister pack’ containing the Implant, Cover Screw, Healing Abutments and Screw.
The Healing abutments are made from PEEK. Both healing abutments are 5.0mm wide and come in two heights; 2.7 and 5.0mm.
The Neoss Implant System inserter engages the internal connection of the implant in a ‘no touch’ delivery method direct from the glass vial. The tip of the inserter also engages the cover screw to facilitate placement.
There is only ONE screwdriver connection in the Neoss System assortment which is used for all screws – Access Abutment components, Cover Screws, Provisional Screws, Impression Coping Screws, Laboratory and Neoss Gold Abutment Screws.
The torque ratchet is designed for the controlled manual insertion of implants and tightening abutment screws under a defined torque.
Titanium Healing Abutments are available in heights 2, 4, 6, 8 & 10mm.
The impression coping is designed for open tray or closed tray impression and is packaged with the implant replica.
Neoss' drill stop solution satisfies all clinical needs and provides improved safety, control and efficiency.
